| Customization: | Available |
|---|---|
| After-sales Service: | Video Technical Support |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Easy Maintenance
·Hood angle for 60° makes all core components at glance.
·Maintenance points available on ground Including water drain, grease nozzle, oil water separator, etc.
·The equipment is equipped with air-prefilter to realize three-stage intake filtration ensuring engine in good working condition.
·Diesel and hydraulic oil filler ports are locked in the hood ensuring security and anti-theft.
Expert compaction technology
·"Three-in-one" Technology
The center of weight, the center of centrifugal force, and the center of geometry are integrated to ensure the uniformity of the amplitude of the left and right sides of drum thus gaining excellent compaction quality.
·Non-impact vibration technology
Flexible and non-impact vibration technology ensures that the vibratory bearing has an operational life in excess of 10,000 hours. Realize dual amplitude through movement of steel balls in two independent chamber. No transient shock and noise.
·Built-in Fans for cooling
Patented cooling technology inside the drum keeps temperatures balanced at around 90°C under normal working condition, 20°C lower than the industry average. This stable temperature regulation helps prolong component life and reduces maintenance.
·Low Maintenance Cost
The "indestructible" exciter will last a lifetime and is virtually maintenance free, requiring only 5L of lubricating oil and on average saving $200 per year.
Safe and Comfort
·Four-column, six-point support cab
Full view / visible range 324 °;Top-mounted air conditioner;Comfortable footsteps, convertible cab slope design.
·Three-stage damping system
Drum absorber, cab absorb block and mechanical suspension high-back seat, the damping effect is up to 99%, maximizing protection for the operator.
|
Operating Mass
|
11350 kg
|
|
Mass On Vibrating Drum
|
6350 kg
|
|
Mass On Drive Axle
|
5000 kg
|
|
Front Drum Static Linear Load
|
292 N/cm
|
|
Emission Regulation
|
Stage II
|
|
Rated Power
|
93 kW (126 hp) @ 2200 rpm
|
|
Vibration Frequency
|
30/33 Hz
|
|
Nominal Amplitude
|
2.0/1.1 mm
|
|
Centrifugal Force
|
300/190 kN
|
|
Drum Diameter
|
1555 mm
|
|
1st Maximum Speed, fwd
|
6 km/h
|
|
2nd Maximum Speed, fwd
|
10.5 km/h
|
|
Theoretical Gradeability
|
45%
|
|
Min. GroundClearance
|
470 mm
|
|
Wheelbase
|
2980 mm
|
|
Min. Outside Turning Radius
|
6500 mm
|
|
Overall Length
|
6000 mm
|
|
Overall Width
|
2280 mm
|
|
Overall Height
|
3180 mm
|
){kind=link}