High Quality 215HP Motor Grader Gr215 with Rear Ripper

• After-sales Service: Contact The Supplier
• Warranty: 1year
• Certification: TUV, ISO, RoHS, CE
• Condition: New
• Application: Railway, Mine, Farmland, Highway
• Transmission: Power
• Model NO.: GR215
• Walking Mode: Wheeled
• Type: Small Grader
• Tread: 1900mm
• Ground Clearance (Front Axle): 550mm
• Rated Power/Speed: 75(2400r/Min)
• Specification: 7130*2375*3150mm
• Trademark: chinese brand
• Origin: China
• HS Code: 84292090

Product Description

High Quality 215Hp Motor Grader GR215 With Rear Ripper

1.GR100 adopts Dongfeng  4BTA3.9-C100-II (SO11847) turbocharged diesel engine with large output torque and power reserve coefficient and low fuel consumption.
2.The torque converter has a large torque coefficient, a high efficiency, a wide effective area, and a good joint operation characteristic with the engine.
3.Rear axle main drive is equipped with "NO-SPIN" without self-locking differential. When one wheel slips, the other wheel can still transmit its original torque.
4.The service brake is a dual-circuit hydraulic brake system that acts on the two rear wheels of the grader and is safe and reliable.
5.The sealed cab is used to configure the air conditioning system. The interior parts are sleek and compact plastic parts, which fully reflects the needs of ergonomics. 
 

Item			GR215
Basic parameters	Engine model		6CTA8.3-C215
	Rated power/speed		160kW/2200rpm
	Overall dimension (standard)		8970x2625x3420
	Total weight (standard)		16500 kg
	Tire specification		17.5-25
	Ground clearance (front axle)		430mm
	Space of front and rear axles		6219 mm
	Space of middle and rear wheels		1538 mm
Performance parameters	Forward velocity		5,8,11,19,23,38km/h
	Reverse speed		5,11,23km/h
	Tractive effort f=0.75		87 kN
	Maximum gradeability		20%
	Tire inflation pressure		260kPa
	Working system pressure		16MPa
	Transmission pressure		1.3-1.8Mpa
Working parameters	Maximum steering angle of front wheel		±50°
	Maximum slant angle of front wheel		±17°
	Maximum oscillating angle of front axle		±15°
	Maximum oscillating angle of equilibrium box		forwards15°, Reverse15°
	Maximum steering angle of frame		±27°
	Minimum turning radius		7.3m
	Scrape knife	Maximum lift height	450mm
		Maximum cutting depth	500mm
		Maximum tilt angle	90°
		Cutting angle	28°-70°
		Angle of revolution	360°
		Length & chord height	4270x610mm
Oil filling amount	Coolant		50L
	Fuel tank		280L
	Engine		24L
	Transmission		38L
	Equilibrium box		46L
	Coolant		28L
	Hydraulic oil		110L