| Customization: | Available |
|---|---|
| Certification: | ISO9001, CE |
| Condition: | New |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
46ton Hydraulic Mine Crawler Excavator E6460f 2.1cbm Excavator
My what/sapp is +86 #1877#6251440
High digging force: high machine weight, high hydraulic system pressure and moderate boom length, which work together to achieve perfect matching, thus achieving the maximum digging force compared with the benchmarking competitors;
Minimum fuel consumption: The 13L electronic fuel injection engine that is tailor made for SD.LG by VOLVO features high power, low speed, good dynamic performance and low fuel consumption;
4-valve structure, supercharging and inter-cooling, and minimum fuel consumption in the case of maximum bucket capacity and operating mass;
Maximum working efficiency: both the fuel tank capacity and standard bucket capacity are higher than the benchmarking competitors, featuring long working time and high working efficiency. Double swing motors with tandem drive, featuring large swing force, high swing speed.
The hydraulic system achieves heat dissipation through the fan which is driven by an independent motor, and the fan speed can be adjusted automatically, featuring good heat dissipation effect and long working time;
Reliability and durability: special mine structural parts, special engine, KAWASAKI master pump / main valve, high-quality core parts, which all contribute to its reliability and durability. The oil bath type air filter features more thorough filtering and safer air supply, and under tough mine conditions, the engine has the lowest failure rate of early abrasion.
The oil bath type air filter features more thorough filtering and safer air supply, and under tough mine conditions, the engine has the lowest failure rate of early abrasion;
Comfort and convenience: comfortable operating environment, good operation softness, and convenient maintenance.
VOLVO fine-adjusted negative flow hydraulic system matches with the engine, featuring good coordination between compound actions and smooth touch;
| Overall dimension | |
| Overall width of upper assembly(A) | 2990mm |
| Overall width(B) | 3340mm |
| Overall height of cab(C) | 3190mm |
| Tail swing radius(D) | 3500mm |
| Overall height of engine hood(E) | 2700mm |
| Ground clearance of counterweight (F) | 1210mm |
| Wheelbase (G) | 4240mm |
| Crawler length (H) | 5180mm |
| Crawler gauge (I) | 2740mm |
| Crawler pad width (J) | 600mm |
| Min. ground clearance (K) | 500mm |
| Overall length (L) | 11020mm |
| Overall height of boom (M) | 3580mm |
| Overall parameters | |
| Bucket capacity | 2.0m³ |
| Overall operating weight | 40050kg |
| Max. excavation force | 236KN |
| Slew speed | 0-10.3r/min |
| Traveling speed (low/high) | 3.4/5.3km/h |
| Average ground pressure | 69.4kPa |
| Max. digging radius | 10610mm |
| Max. digging depth | 6850mm |
| Max. digging height | 10170mm |
| Max. dumping height | 7090mm |
| Min. front slewing radius | 4380mm |
| Engine | |
| Model | SD130A |
| Type | Water-cooled, Four-stroke,supercharged |
| Rated Power@Revolution Speed | 215kw/1700r/min |
| Displacement | 12800mL |
| Cylinder bore × stroke | 131*158mm |
| Emission standard | GB20891-2014 China Phase III |
| Traveling/swing system | |
| Qty. of carrier rollers (single side) | 2 |
| Qty. of track rollers (single side) | 9 |
| Traveling brake type | Wet disc brake |
| Swing mode | Hydraulic drive internal tooth single-row ball-bearing |
| Swing brake type | Wet disc brake |
| Hydraulic system | |
| Hydraulic control type | Pilot proportional control valve |
| Hydraulic system type | dual pump constant power negative flow control system |
| Max. flow | 2*300+25.5L/min |
| Main pump model | K3V180 |
| Operating pressure | 320/350kgf/cm2 |
| Main valve model | KMX32N |
| Arm cylinder - cylinder bore× diameter of piston rod × stroke |
1-175*115*1700mm |
| Boom cylinder - cylinder bore× diameter of piston rod × stroke |
2-160*105*1530mm |
| Bucket cylinder - cylinder bore× diameter of piston rod × stroke |
1-145*100*1285mm |
| Fill capacity | |
| Fuel | 620L |
| Engine oil | 45L |
| Hydraulic oil | 515L |
| Antifreeze | 2×6.8L |
| Swing reducer | 6.0L |
){kind=link}