Product Description
New Model 70ton Hydraulic System Truck Crane qy70K
QY70K is the most popular model of China 70 ton truck crane, With the features of maturity and reliability of the old model.
Advantages and highlights:
1. The layout mode of oil port of radiator is optimized, heat radiating area of core is increased by 50%, radiation power of hydraulic oil radiator is improved from 10kW to 18kW, permissible ambient temperature exceeds 55ºC, which meets the requirements for high temperature operation.
2. The protecting ply of wiring harness is produced according to Technical Conditions of Automobile Low-voltage Wiring Harness, heat-resistant temperature is increased to 105ºC, corrugated pipes are added for protection, protection class of plug-ins is IP67. The service life in high temperature operation exceeds 15 years.
3. The seals of key hydraulic components such hydraulic pump, hydraulic motor, extension cylinder, jack cylinder, steering boosting cylinder, elevating cylinder and telescoping cylinder are upgraded to high temperature resistant silicon rubber lip seal, working efficiency is improved by 10%.
4. High-power air-conditioner meets the requirements of T3 working condition High-power air-conditioners are equipped in driver' s cab and operator' s cab, heat transferring area of condenser is increased by 75%, displacement of compressor is increased by 20%, refrigeration effect is improved by above 25% relative to regular products, which meets the requirements of T3 working
Product Parameters
MainTechnical Data Table in Travel configuration
|
Description |
|
Unit |
Parameter value |
Overall length |
|
mm |
13900 |
Overall width |
|
mm |
2800 |
Overall Height |
|
mm |
3575 |
Axle base |
1st ,2nd axle |
mm |
1470 |
2nd ,3rd axle |
|
4105 |
3rd ,4th axle |
|
1350 |
Wheel Base |
|
mm |
2304+2075 |
Total vehicle mass in travel configuration |
|
kg |
43000 |
Axle load |
1st and 2nd Axle |
kg |
17000 |
3rd and 4th Axle |
|
26000 |
Engine rated power |
|
kw/(r/min) |
276/2200 |
Engine rated torque |
|
N.m/(r/min) |
1500/1400 |
Engine rated rotational speed |
|
r/min |
2100 |
Max. travel speed |
|
km/h |
80 |
Min. steady travel speed |
|
km/h |
3 |
Min. turning diameter |
|
m |
24 |
Min. turning diameter at boom tip |
|
m |
29 |
Min. ground clearance |
|
mm |
327 |
Max. grade ability |
|
% |
40 |
Approach angle |
|
° |
19 |
Departure angle |
|
° |
11 |
Braking distance |
|
m |
≤10 |
Oil consumption per 100km |
|
L |
45 |
.Main Technical Data Table for Lifting Operation |
Max. total rated lifting capacity |
|
|
t |
70 |
Min. rated working radius |
|
|
m |
3 |
Turning radius at turntable tail |
|
|
mm |
3550 |
Max. load moment |
|
Base boom |
KN.m |
2303 |
|
Fully-extended boom |
1129 |
|
Fully-extended boom + Jib |
580.2 |
Outrigger span |
|
Longitudinal |
m |
6.1 |
|
Lateral |
7.3 |
Hoist height |
|
Base boom |
m |
11.8 |
|
Fully-extended boom |
44.2 |
|
Fully-extended boom + Jib |
59.4 |
Boom length |
|
Base boom |
m |
11.6 |
|
Fully-extended boom |
44.5 |
|
Fully-extended boom + Jib |
59.5 |
Jib offset angle |
|
|
° |
0, 15, 30 |
Time for boom raising |
|
|
s |
60 |
Time for boom extending fully |
|
|
s |
80 |
Max. slewing speed |
|
|
r/min |
2 |
Telescoping time |
|
Fully extended |
s |
150 |
|
Fully retracted |
100 |
Outrigger extending and retracting time |
Outrigger beam |
Extending Simultaneously |
s |
30 |
Retracting Simultaneously |
20 |
Outrigger jack |
Extending Simultaneously |
35 |
Retracting Simultaneously |
30 |
Hoisting speed |
Main winch |
No load |
m/min |
130 |
Full load |
75 |
Auxiliary winch |
No load |
108 |
Full load |
98 |
Exterior noise level |
|
|
dB (A) |
≤122 |
Noise level at seated position |
|
|
dB (A) |
≤90 |
|
|
|
|
|
|
|
|
Detailed Photos
Packaging & Shipping
Company Profile
After Sales Service
FAQ