| Customization: | Available |
|---|---|
| After-sales Service: | 1 Year |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Company Address
Suite 602, Building 2, Tiandu Plaza, No.211 Changjiang Road, National Hi-Tech District, Suzhou, Jiangsu, China.
Product Description
* Closed hydraulic drive system is adopted to realize stepless speed change.
* Brake system uses the neutral position braking, emergency braking and parking brake, short braking distance and high braking torque, ensuring the safety of the product.
* The front vision of machine is less than 1x0.75 m, rear view without any shade, which provides drivers with a good sight range.
* The vibration system can realize the simultaneous vibration and independent vibration of the rear and front drum, and meets the different working conditions.
* High frequency vibration and excitation force design, high working efficiency, good compaction effect.
* Vibration drum width is larger than frame width, convenient to observe compaction condition of drum edge in the construction.
* Large ground clearance and curb clearance, strong trafficabilit, good edge com- paction performance.
* This machine has also the air intake preheating function, can realize low temperature cold start.
* Changchai water-cooled turbocharged engine, in compliance with China Stage III emission requirements, allowing machine working normally in the environment at an altitude of 2000 meters and temperature above -20 ºC.
Specification
|
Item
|
Unit
|
XMR403
|
|
Operating mass
|
kg
|
4000
|
|
Static linear load (front drum/rear drum)
|
N/cm
|
157/157
|
|
Vibrational frequency
|
Hz
|
60
|
|
Amplitude
|
mm
|
0.41
|
|
Exciting force
|
kN
|
42
|
|
Vibrating drum (Diameter x width)
|
mm
|
800x1300
|
|
Theoretical gradeability
|
%
|
30
|
|
Operating speed
|
km/h
|
0~10.6
|
|
Wheel base
|
mm
|
1920
|
|
Steering angle
|
°
|
±30
|
|
Swing angle
|
°
|
±10
|
|
Minimum turning radius
|
mm
|
3062 / 4362
|
|
Minimum ground clearance
|
mm
|
348
|
|
Engine type
|
|
ZN490B
|
|
Rated power
|
kW
|
36
|
|
Rated speed
|
r/min
|
2600
|
){kind=link}