| Customization: | Available |
|---|---|
| After-sales Service: | Online Service |
| Warranty: | One Year |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
SD32W rock bulldozer is researched and developed independently on the basis of SD32 standard bulldozer in response to the demands of severe heavy-load working conditions, such as decomposed rock and frozen earth.
* This product adopts hydraulic drive and hydraulic control technologies, featuring advanced and reasonable structure, stable and reliable performances, and light and flexible operations.
* The rock bulldozer is equipped with special tracks and the high strength wear-resistant blade and push rod to remarkably improve the wear resistance and especially adapt to the heavyduty conditions such as coarse sand, stone, decomposed lithosphere, and frozen earth.
| PRODUCT | SD32W | ||
| ROCK | |||
| PERFORMANCE PARAMETERS | Operatiing Weight (kg) | 34600 | |
| Rated horsepower (kw/hp) | 257/345 | ||
| Minimum turning radius (mm) | 3800 | ||
| Ground pressure (kpa) | 84.1 | ||
| ENGINE | Model | NTA855-C360S10 | |
| Emission | China I | ||
| Type | In-line,direct injection,water cooled,4-cycles,turbocharged | ||
| No.of cylinders×Bore×stroke (mm×mm) | 6×140×152 | ||
| Piston displacement (L) | 14 | ||
| Horsepower/rpm (kw/rpm) | 257/2000 | ||
| Maximum torque (N.m/r/min) | 1440/1400 | ||
| DIMENSIONS | Length(mm) | 8650 | |
| Width(mm) | 4130 | ||
| Height(mm) | 3760 | ||
| TRAVELING PERFORMANCE | Forward/Reverse(km/h) | F1:0-3.6 F2: 0-6.6 F3: 0-11.5 R1:0-4.4 R2: 0-7.8 R3: 0-13.5 |
|
| Gradeability(deg) | 30 | ||
| Clearance(mm) | 500 | ||
| TRANSMISSION | Torque convertor | 3-element, single stage, 1-phase | |
| Gear box | Planetary gear and powershift transmission, hydraulically actuated, forced lubrication | ||
| Main drive | Spiral bevel gear, single-stage speed reduction, splash lubrication | ||
| Steering clutch | Wet multiple disc,coned disc spring loaded, hydraulically actuated, hand operated,interconnected with steering brake | ||
| Brake | Wet, contracting band,foot operated with hydraulic booster | ||
| Final driver | spur gear,double reduction ,splash lubrication | ||
| UNDERCARRIAGE | Suspension | Swing type of sprayed beam,suspended structure of equalizer bar | |
| Track gauge (mm) | 2140 | ||
| Shoe width (mm) | 560 | ||
| Track length on ground (mm) | 3150 | ||
| Number of shoes (each side) | 41 | ||
| Pitch (mm) | 228.6 | ||
| Carrier rollers (each side) | 2 | ||
| Track rollers (each side) | 7 | ||
| WORKING HYDRAULIC SYSTEM | Pressure (MPa) | 14 | |
| Working pump | Gear pump | ||
| Valve | Multi-way valve | ||
| Bore of blade lift cylinder (mm) | 140 | ||
| Bore of blade tilt cylinder (mm) | 225 | ||
| TANK CAPACITY | Fuel tank capacity (L) | 640 | |
| Working hydraulic tank capacity (L) | 97 | ||
| WORKING EQUIPMENT | Blade width (mm) | 4130 | |
| Blade height (mm) | 1710 | ||
| Blade capacity (m³) | 10.5(Semi-U) | ||
| Max.Drop below ground of blade | 1560 | ||
| Lift height of blade | 560 | ||
| Type of ripper | Single shank/Three shanks | ||
| Maximum digging depth of ripper (mm) | 1250/842 | ||
| Maximum lifting height of ripper (mm) | 1590 | ||
){kind=link}